Treatment Area
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.

Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.

A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Start with a consultation and discuss which treatment category may be relevant to your concern.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Ellansé is an injectable collagen biostimulator formulated with Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier.
Designed to provide immediate facial volume restoration while stimulating the body's natural collagen production, Ellansé helps improve facial contours, soften wrinkles and support long-term skin firmness for natural-looking rejuvenation.
Ellansé helps address facial volume loss and visible signs of ageing by restoring structural support and stimulating collagen production over time.
Ellansé contains smooth Polycaprolactone (PCL) microspheres suspended in a Carboxymethyl Cellulose (CMC) gel carrier. Upon injection, the CMC gel provides immediate volume and wrinkle correction, while the PCL microspheres stimulate natural collagen production over time, helping restore facial volume, improve skin structure and maintain a firmer appearance.
Face, Including Forehead, Temples, Brow Area, Cheeks, Nasolabial Folds, Corners of the Mouth, Marionette Lines, Chin and Jawline. Treatment areas depend on individual facial anatomy and medical assessment.
Approximately 30 minutes, depending on the treatment area and injection technique.
Topical numbing cream may be used to minimise discomfort. Patients may experience mild pressure, stinging or tenderness during injection.
Minimal downtime is generally expected. Temporary swelling, redness, bruising, itching or tenderness around the injection sites may occur.
One treatment session is generally sufficient to achieve immediate correction and collagen stimulation. Additional treatment should only be considered following medical assessment.
Immediate improvements in facial volume and wrinkle correction may be visible after treatment. Further improvements develop gradually as collagen production progresses. An expected duration of 1–4 years, depending on the selected formulation. Individual results vary.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.