Treatment Area
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Fotona4D is a non-invasive laser facial rejuvenation treatment designed to improve skin firmness, elasticity, texture and facial contours without surgery or injections.
Combining two complementary laser wavelengths, Er (2940 nm) and Nd (1064 nm), Fotona4D® uses a four-step treatment approach to target different skin layers, supporting collagen remodelling and natural-looking facial rejuvenation.
Fotona4D helps address visible signs of facial ageing, reduced skin elasticity and uneven skin texture by targeting both superficial and deeper supporting tissues.

Fotona4D combines Er and Nd laser technologies to deliver controlled thermal energy into different layers of the skin. The treatment uses four complementary laser modes, beginning with intraoral tightening and progressing through skin rejuvenation, deeper tissue heating and superficial resurfacing. These combined effects support collagen contraction and remodelling, helping improve facial firmness, skin texture and overall skin quality over time.
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Varies depending on the treatment protocol, selected laser modes and individual treatment plan.
Patients may experience warmth, tingling or mild discomfort during treatment. The intraoral and skin-tightening stages are generally well tolerated, while the superficial resurfacing stage may cause temporary sensitivity.
Little to minimal downtime is generally expected. Temporary redness, warmth, mild swelling or sensitivity may occur. The superficial peeling stage may also cause temporary dryness, flaking or peeling, depending on treatment settings.
A series of treatments may be recommended depending on individual skin laxity, facial concerns and treatment response. The number of sessions and treatment intervals are personalised following medical assessment.
Some improvements in skin tightness and texture may be noticeable following treatment. Further improvements may develop gradually as collagen remodelling continues, with the manufacturer describing continued improvement for up to 6 months. Results vary depending on individual skin condition, treatment settings and response.

A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Start with a consultation and discuss which treatment category may be relevant to your concern.
Fotona4D is a non-invasive laser facial rejuvenation treatment designed to improve skin firmness, elasticity, texture and facial contours without surgery or injections.
Combining two complementary laser wavelengths, Er (2940 nm) and Nd (1064 nm), Fotona4D® uses a four-step treatment approach to target different skin layers, supporting collagen remodelling and natural-looking facial rejuvenation.
Fotona4D helps address visible signs of facial ageing, reduced skin elasticity and uneven skin texture by targeting both superficial and deeper supporting tissues.
Fotona4D combines Er and Nd laser technologies to deliver controlled thermal energy into different layers of the skin. The treatment uses four complementary laser modes, beginning with intraoral tightening and progressing through skin rejuvenation, deeper tissue heating and superficial resurfacing. These combined effects support collagen contraction and remodelling, helping improve facial firmness, skin texture and overall skin quality over time.
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Varies depending on the treatment protocol, selected laser modes and individual treatment plan.
Patients may experience warmth, tingling or mild discomfort during treatment. The intraoral and skin-tightening stages are generally well tolerated, while the superficial resurfacing stage may cause temporary sensitivity.
Little to minimal downtime is generally expected. Temporary redness, warmth, mild swelling or sensitivity may occur. The superficial peeling stage may also cause temporary dryness, flaking or peeling, depending on treatment settings.
A series of treatments may be recommended depending on individual skin laxity, facial concerns and treatment response. The number of sessions and treatment intervals are personalised following medical assessment.
Some improvements in skin tightness and texture may be noticeable following treatment. Further improvements may develop gradually as collagen remodelling continues, with the manufacturer describing continued improvement for up to 6 months. Results vary depending on individual skin condition, treatment settings and response.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Fotona4D is a non-invasive laser facial rejuvenation treatment designed to improve skin firmness, elasticity, texture and facial contours without surgery or injections.
Combining two complementary laser wavelengths, Er (2940 nm) and Nd (1064 nm), Fotona4D® uses a four-step treatment approach to target different skin layers, supporting collagen remodelling and natural-looking facial rejuvenation.
Fotona4D helps address visible signs of facial ageing, reduced skin elasticity and uneven skin texture by targeting both superficial and deeper supporting tissues.
Fotona4D combines Er and Nd laser technologies to deliver controlled thermal energy into different layers of the skin. The treatment uses four complementary laser modes, beginning with intraoral tightening and progressing through skin rejuvenation, deeper tissue heating and superficial resurfacing. These combined effects support collagen contraction and remodelling, helping improve facial firmness, skin texture and overall skin quality over time.
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Varies depending on the treatment protocol, selected laser modes and individual treatment plan.
Patients may experience warmth, tingling or mild discomfort during treatment. The intraoral and skin-tightening stages are generally well tolerated, while the superficial resurfacing stage may cause temporary sensitivity.
Little to minimal downtime is generally expected. Temporary redness, warmth, mild swelling or sensitivity may occur. The superficial peeling stage may also cause temporary dryness, flaking or peeling, depending on treatment settings.
A series of treatments may be recommended depending on individual skin laxity, facial concerns and treatment response. The number of sessions and treatment intervals are personalised following medical assessment.
Some improvements in skin tightness and texture may be noticeable following treatment. Further improvements may develop gradually as collagen remodelling continues, with the manufacturer describing continued improvement for up to 6 months. Results vary depending on individual skin condition, treatment settings and response.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Fotona4D is a non-invasive laser facial rejuvenation treatment designed to improve skin firmness, elasticity, texture and facial contours without surgery or injections.
Combining two complementary laser wavelengths, Er (2940 nm) and Nd (1064 nm), Fotona4D® uses a four-step treatment approach to target different skin layers, supporting collagen remodelling and natural-looking facial rejuvenation.
Fotona4D helps address visible signs of facial ageing, reduced skin elasticity and uneven skin texture by targeting both superficial and deeper supporting tissues.
Fotona4D combines Er and Nd laser technologies to deliver controlled thermal energy into different layers of the skin. The treatment uses four complementary laser modes, beginning with intraoral tightening and progressing through skin rejuvenation, deeper tissue heating and superficial resurfacing. These combined effects support collagen contraction and remodelling, helping improve facial firmness, skin texture and overall skin quality over time.
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Varies depending on the treatment protocol, selected laser modes and individual treatment plan.
Patients may experience warmth, tingling or mild discomfort during treatment. The intraoral and skin-tightening stages are generally well tolerated, while the superficial resurfacing stage may cause temporary sensitivity.
Little to minimal downtime is generally expected. Temporary redness, warmth, mild swelling or sensitivity may occur. The superficial peeling stage may also cause temporary dryness, flaking or peeling, depending on treatment settings.
A series of treatments may be recommended depending on individual skin laxity, facial concerns and treatment response. The number of sessions and treatment intervals are personalised following medical assessment.
Some improvements in skin tightness and texture may be noticeable following treatment. Further improvements may develop gradually as collagen remodelling continues, with the manufacturer describing continued improvement for up to 6 months. Results vary depending on individual skin condition, treatment settings and response.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Fotona4D is a non-invasive laser facial rejuvenation treatment designed to improve skin firmness, elasticity, texture and facial contours without surgery or injections.
Combining two complementary laser wavelengths, Er (2940 nm) and Nd (1064 nm), Fotona4D® uses a four-step treatment approach to target different skin layers, supporting collagen remodelling and natural-looking facial rejuvenation.
Fotona4D helps address visible signs of facial ageing, reduced skin elasticity and uneven skin texture by targeting both superficial and deeper supporting tissues.
Fotona4D combines Er and Nd laser technologies to deliver controlled thermal energy into different layers of the skin. The treatment uses four complementary laser modes, beginning with intraoral tightening and progressing through skin rejuvenation, deeper tissue heating and superficial resurfacing. These combined effects support collagen contraction and remodelling, helping improve facial firmness, skin texture and overall skin quality over time.
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Varies depending on the treatment protocol, selected laser modes and individual treatment plan.
Patients may experience warmth, tingling or mild discomfort during treatment. The intraoral and skin-tightening stages are generally well tolerated, while the superficial resurfacing stage may cause temporary sensitivity.
Little to minimal downtime is generally expected. Temporary redness, warmth, mild swelling or sensitivity may occur. The superficial peeling stage may also cause temporary dryness, flaking or peeling, depending on treatment settings.
A series of treatments may be recommended depending on individual skin laxity, facial concerns and treatment response. The number of sessions and treatment intervals are personalised following medical assessment.
Some improvements in skin tightness and texture may be noticeable following treatment. Further improvements may develop gradually as collagen remodelling continues, with the manufacturer describing continued improvement for up to 6 months. Results vary depending on individual skin condition, treatment settings and response.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.
Fotona4D is a non-invasive laser facial rejuvenation treatment designed to improve skin firmness, elasticity, texture and facial contours without surgery or injections.
Combining two complementary laser wavelengths, Er (2940 nm) and Nd (1064 nm), Fotona4D® uses a four-step treatment approach to target different skin layers, supporting collagen remodelling and natural-looking facial rejuvenation.
Fotona4D helps address visible signs of facial ageing, reduced skin elasticity and uneven skin texture by targeting both superficial and deeper supporting tissues.
Fotona4D combines Er and Nd laser technologies to deliver controlled thermal energy into different layers of the skin. The treatment uses four complementary laser modes, beginning with intraoral tightening and progressing through skin rejuvenation, deeper tissue heating and superficial resurfacing. These combined effects support collagen contraction and remodelling, helping improve facial firmness, skin texture and overall skin quality over time.
Face, Including Cheeks, Nasolabial Folds, Perioral Area and Jawline
Varies depending on the treatment protocol, selected laser modes and individual treatment plan.
Patients may experience warmth, tingling or mild discomfort during treatment. The intraoral and skin-tightening stages are generally well tolerated, while the superficial resurfacing stage may cause temporary sensitivity.
Little to minimal downtime is generally expected. Temporary redness, warmth, mild swelling or sensitivity may occur. The superficial peeling stage may also cause temporary dryness, flaking or peeling, depending on treatment settings.
A series of treatments may be recommended depending on individual skin laxity, facial concerns and treatment response. The number of sessions and treatment intervals are personalised following medical assessment.
Some improvements in skin tightness and texture may be noticeable following treatment. Further improvements may develop gradually as collagen remodelling continues, with the manufacturer describing continued improvement for up to 6 months. Results vary depending on individual skin condition, treatment settings and response.
A medical assessment is required before treatment. Inform your doctor of your medical history, current medications, allergies, previous treatments and any relevant health conditions.